Scroll and Click ↑ •
45 • Use arrow keys ↓
1/45
2/45
3/45
4/45
5/45
6/45
7/45
8/45
9/45
10/45
11/45
12/45
13/45
14/45
15/45
16/45
17/45
18/45
19/45
20/45
21/45
22/45
23/45
24/45
25/45
26/45
27/45
28/45
29/45
30/45
31/45
32/45
33/45
34/45
35/45
36/45
37/45
38/45
39/45
40/45
41/45
42/45
43/45
44/45
45/45
About Ladder
Hatch mounted ladder - For passenger or driver side
- • The most challenging project at different times - laser cut brackets (4 components), bending...
- • Nobody ordered raw steel version yet... and for a good reason, powder coating fits the ladder great
- • Only 1 copy was made for driver side so far, all others have been passenger side
- • Interesting fact - with Shrockworks rear tire carrier, the ladder works as is on passengers side, no changes needed
- • Made from 1.25 inch tubing only once
- • Since then has been reduced to 1 inch tubing and 3 inch narrower width
- • January 2023: 3 ladders are ready to ship right away
- • Top bracket is cut by laser and bent, then welded on
- • 2 inch risers are cut by a saw and ends closed by welding on a 1 inch disk
- • 2 brackets are welded on
- • 2 brackets are bolted on
- • Optional accessories
- • Both made from stainless steel and don't need to be painted
- • With 4 square hole pattern for holding Rotopax mounts
- • Shovel holder use Rotopax holes
roXterra