Dual Battery trays - hold dual batteries where single car battery was
Buy here: roXfinder.com/dual Purchase history, shopping cart, favorites and more
on our new website
$300
Dual battery tray
• with mounting holes, and threaded rods
• 1/8 inch thick stainless steel, 2 laser cut trays with lips bent up
• threaded rods are 5/16 inch thick stainless steel (13mm socket tightens)
• welded together into a single piece
Dual battery tray
Xterra Dual
$
0
Batteries supported
• either tray can hold a 24 or 35 size batteries
• top battery should be primary (aka stock, aka House battery) for stock harness connection
• default setup is 35 battery on top, 24 battery on bottom
• -- specify if your setup is different as 35 is 1 inch taller than 24, and therefor the threaded mount bars can be too tall or short in different layouts
• includes: 1) threaded rods and locking nuts (both stainless steel, 2) simple battery top holders held by the above nuts
• +$50 Deluxe set includes nutserts, bolts, spliced connectors, 1/4 inch ABS plate
• Physical battery dimensions:
• 35 size battery: 9 x 7 inches at 9 inch height
• 24 size battery: 10.5 x 6 inches at 9 inch height
• 24 Optima blue: 10 x 7 inches at 8 inch height
Batteries supported
Original single battery layout
• Before installing the dual battery trays
Original single battery layout
Dual battery with power steering reservoir relocated
• battery step to fit batteries with top water terminals - specify bracket with or without this step
Dual battery with power steering reservoir relocated
Dual battery monitoring
• Gauges holder optionally available -- Gauges holder
roXterra
