2a.Enlarge hole for nutsert for Bracket 1
- * Enlarge hole with 23/64 bit (just a 1/64 step above 3/8 inch)
- * Mount bracket 2 (bottom) using a 10mm head bolt loosed when moving the power steering reservoir
- * use 1/4 inch nutsert (included with Deluxe package)
- * Insert bolt into bottom of Bracket 1 as shown, and fasten to the nutsert
- * Top of Bracket 2 can be seen
- * Green shows the path of the final bolt
- * The 2 brackets connect to each other
- * Enlarge hole with 23/64 bit (just a 1/64 step above 3/8 inch)
- * Mount bracket 2 (bottom) using a 10mm head bolt loosed when moving the power steering reservoir
- * Different sides of Bracket 1 mounted
2b.Place nutsert into enlarged hole
2c.Closeup - Nutsert for Bracket 1, bottom mounted Bracket 2
3.Mount Bracket 1
4.Mount Bracket 2 to original Power Steering bracket
5.Mount Bracket 1 to Bracket 2
6.Bracket 1 and Bracket 2 installed
Mounting for Bracket 1 and Bracket 2
Bracket 1 angles - part 1
Bracket 1 angles - part 2
