with Rotopax containers and fire extinguisher between them
Maxtrax panel with treadboards above
Xterra Sherpa
$
0
Expires 2024-12-22
1 18:07:21
Rotopax and Maxtrax with optional Maxtrax panel
Maxtrax panel is as long as needed for Maxtrax mounting holes
Maxtrax pins allow easy on/off (sold where Maxtrax are sold; hold 2 or 4 Maxtrax)
Water spout is pointed down to allow water serving with the turn of the lever
L panel
3/16 inch thick aluminum
holds main panel (same thickness)
powder coat is textured
can be used without main panel, to hold treadboards/Maxtrax
Suction cups used
2 used per side, with 2 different risers
center mounted studs, mount through aluminum panels with 1/4 inch nuts
Construction
separate product for driver's side, another for passenger side
Aluminum panels won't rust and weigh around 10lb, angled brackets + large panel
Stainless steel hardware, nylon insert self locking nuts; 3/16 hex head front and 5/16 back nuts
Rubber pads separate panel from glass
mounts in 2 parts for easier installation, angled top bracket first
powder coated black, or raw aluminum for your own custom painting
Usage
1 or 2 RotoPax containers sit side by side, 2 gallons each, 1, 1.5...
tread boards can also be mounted, but will stick out from the back if youurs are 45+ inches long
all holes (slits and X shapes) are 1/4 inch wide, allow for attaching your own bolts for future accessories
wide hole strips, vertical and horizontal, allow for strap attachments
4 hole square pattern on main panel is for Rotopax mounts (2 1/8 inch square holes fit the square Rotopax bolt mounts)
customizing: drill your own holes if needed in the future (measure twice)
Driver main panel
July 2024: latest version
Raw aluminum (before sanding)
Can be used on either side
Passenger main panel
July 2024: latest version
Sanded aluminum (before powder coating)
Extra holes for visibility on passenger side
Can be used on either side
Marked holes on main panel
Red: regular mounting positions for Rotopax container mounts
-- By using the adjacent holes you can distance the containers, introducing a gap for a fire extinguisher to mount
Blue: mounting holes for suction cups
Green: Fire extinguisher mounting holes -- when mounted here, and the left Rotopax mount furthest away, the fire extinguisher can be removed without removing the Rotopax container
-- To require Rotopax container removal first, use the 3 holes to the left instead
Top 4 holes are for joining main panel to top (wing) panel
Gear to get
Compare prices from Rotopax.com to GoWesty.com and Amazon.com
Gen1 Rotopax containers are not supported, they only fit upside down. Use Gen2 Rotopax containers only.
4 gallon Rotopax is not a goot fit, it sticks too far off the back and is not tall enough, making for a poor use of the main panel space. Using two 2 gallon containers is more convenient.