Maxtrax panel for Sherpa - Pathfinder products 2022-2024

for November

X Gen2 X Gen1 Frontier Path 05 Path 2022 Toyota FJ Cruiser 4Runner Gen3 Subaru Trucks

Lowrider Slim Skids Coastal ARB Shrock Nismo Sherpa Ladder Window Hatch Door Dual Stools Bone Shovel Emblem Gauges

Sherpa side rack - carry Rotopax water and gas, Maxtrax and treadboards

Xterra 05-15 Xterra 00-04 Pathfinder 05-12 Pathfinder 22-24 Frontier 05-23 FJ cruiser 07-14

Wide view of Maxtrax panel

Maxtrax panel

• 1/4 inch holes of Maxtrax panel match holes on Sherpa L panel
• Maxtrax pins installed
• extra stock-rails attachment at the front of Maxtrax board

Shade on Rotopax containers

Soft pad attached to L panel

• avoid metal on metal with Maxtrax and L panel

Rear view of Maxtrax panel

Maxtrax boards on Maxtrax panel

• 2 or 4 boards (Maxtrax pins flexibility - buy them where Maxtrax are sold)

Powdercoated Maxtrax panel

• this textured coating hides dirt much better than glossy or matte finishes
• same textured coating is used on L panel and Main panel
• remove this panel from Sherpa with just a few bolts
• Use 4, 6, 8 bolt... it's up to you
• shift the panel by using different holes from the 68 available
• also shift the stock rails front attachment accordingly

L panel mounted without Main panel

• top holes match treadboards/Maxtrax panel
• attach items using a variety of these 1/4 inch holes
• works with Lowrider rack; works with Slim rack

Non-Maxtrax treadboards mount panel

• 24.5 inch spacing of holes
• L panel used without main panel (remove main panel by loosening 4 bolts)
• slot holes for inconsistent measurements of Non-Maxtra