• Your Pathfinder needs to be have Rock Creek roofrack from Nissan, or aftermarket roof rack -- the original Pathfinder roof rack (except Rock Creek) does not have good mounting spots for Sherpa
• Aftermarket roof racks with metal round bars would work, as would aftermarket roof racks with metal constructions
• Water container is ready to serve with turn of a lever with GoWesty spout (see Links page)
Pathfinder Sherpa
Pathfinder22 Sherpa
$
549
Expires 2025-06-25
02:01:32
Rear View
• Multiple locations for mounting Rotopax containers (square holes)
• Wider Rotopax container sepraation allows for installing fire extinguisher between them
Rear View
Powder coated Sherpa
• Passenger side main panel has extra holes for better driver visibility
Powder coated Sherpa
Front View
• Mounted on driver side
• Can be on eitehr or both side with a separate wing panel on top
Front View
Main panel layout
• 2 positions for left Rotopax container
• 3 positions for right Rotopax container
• Fire extinguisher mount holes in between
Main panel layout
Side view
• Showing maximum container separation to fit fire extinguisher in between
• Containers can be 2 inches closer by using other mounting locations
Side view
Rock Creek roof rack
• Sherpa on Pathfinder needs Rock Creek roof rack (it might be possible to install it on other Pathfinders), or aftermarket roof racks
Rock Creek roof rack
Rotopax and fire extinguisher
Rotopax and fire extinguisher
Maxtrax on Maxtrax panel
• Maxtrax panel is as long as needed for Maxtrax mounting holes
• Maxtrax pins allow easy on/off (sold where Maxtrax are sold; hold 2 or 4 Maxtrax)
Maxtrax on Maxtrax panel
L panel on top
• 3/16 inch thick aluminum
• holds main panel (same thickness)
• powder coat is textured
• can be used without main panel, to hold treadboards/Maxtrax
L panel on top
Suction cups used
• 2 used per side, with 2 different risers
• center mounted studs, mount through aluminum panels with 1/4 inch nuts
Suction cups used
Construction
• separate product for driver's side, another for passenger side
• Aluminum panels won't rust and weigh around 10lb, angled brackets + large panel
• Stainless steel hardware, nylon insert self locking nuts; 3/16 hex head front and 5/16 back nuts
• Rubber pads separate panel from glass
• mounts in 2 parts for easier installation, angled top bracket first
• powder coated black, or raw aluminum for your own custom painting
Usage
• 1 or 2 RotoPax containers sit side by side, 2 gallons each, 1, 1.5...
• tread boards can also be mounted, but will stick out from the back if youurs are 45+ inches long
• all holes (slits and X shapes) are 1/4 inch wide, allow for attaching your own bolts for future accessories
• wide hole strips, vertical and horizontal, allow for strap attachments
• 4 hole square pattern on main panel is for Rotopax mounts (2 1/8 inch square holes fit the square Rotopax bolt mounts)
• customizing: drill your own holes if needed in the future (measure twice)
Gear to get
• Compare prices from Rotopax.com to GoWesty.com and Amazon.com
roXterra
