• fire extinguisher can be mounted in between by using wider separation (user choice)
• Maxtrax panel with treadboards above is optional
• FJroX will be the default text; user selected text is available
FJ Cruiser Sherpa
$
0
Expires 2024-11-17
11:10:03
Side View
• Rotopax containers can be further apart to allow Fire Extinguisher mounting between them
Wing logo closeup
• fjRox logo closeup
Main Panel covered
• Main Panel is mostly covered by 2 Rotopax containers
Main Panel
• Main panel showing hole pattern for multiple mounting locations for the same Rotopax container
Main panel layout
• 2 positions for left Rotopax container
• 3 positions for right Rotopax container
• Fire extinguisher mount holes in between
• fjRox logo pictured earlier is used here
Marked holes on main panel
• Red: regular mounting positions for Rotopax container mounts
• -- By using the adjacent holes you can distance the containers, introducing a gap for a fire extinguisher to mount
• Blue: mounting holes for suction cups
• Green: Fire extinguisher mounting holes -- when mounted here, and the left Rotopax mount furthest away, the fire extinguisher can be removed without removing the Rotopax container
• -- To required Rotopax container removal first, use the 3 holes to the left instead
• Top 4 holes are for joining main panel to top (wing) panel
Rotopax and fire extinguisher
Maxtrax on Maxtrax panel
• Maxtrax panel is as long as needed for Maxtrax mounting holes
• Maxtrax pins allow easy on/off (sold where Maxtrax are sold; hold 2 or 4 Maxtrax)
L panel on top
• 3/16 inch thick aluminum
• holds main panel (same thickness)
• powder coat is textured
• can be used without main panel, to hold treadboards/Maxtrax
Suction cups used
• 2 used per side, with 2 different risers
• center mounted studs, mount through aluminum panels with 1/4 inch nuts
Construction
• separate product for driver's side, another for passenger side
• Aluminum panels won't rust and weigh around 10lb, angled brackets + large panel
• Stainless steel hardware, nylon insert self locking nuts; 3/16 hex head front and 5/16 back nuts
• Rubber pads separate panel from glass
• mounts in 2 parts for easier installation, angled top bracket first
• powder coated black, or raw aluminum for your own custom painting
Usage
• 1 or 2 RotoPax containers sit side by side, 2 gallons each, 1, 1.5...
• tread boards can also be mounted, but will stick out from the back if youurs are 45+ inches long
• all holes (slits and X shapes) are 1/4 inch wide, allow for attaching your own bolts for future accessories
• wide hole strips, vertical and horizontal, allow for strap attachments
• 4 hole square pattern on main panel is for Rotopax mounts (2 1/8 inch square holes fit the square Rotopax bolt mounts)
• customizing: drill your own holes if needed in the future (measure twice)
Gear to get
• Compare prices from Rotopax.com to GoWesty.com and Amazon.com
roXterra
