• Maxtrax panel is as long as needed for Maxtrax mounting holes
• Maxtrax pins allow easy on/off (sold where Maxtrax are sold; hold 2 or 4 Maxtrax)
• Water spout is pointed down to allow water serving with the turn of the lever
Rotopax and Maxtrax with optional Maxtrax panel
L panel
• 3/16 inch thick aluminum
• holds main panel (same thickness)
• powder coat is textured
• can be used without main panel, to hold treadboards/Maxtrax
L panel
Suction cups used
• 2 used per side, with 2 different risers
• center mounted studs, mount through aluminum panels with 1/4 inch nuts
Suction cups used
Construction
• separate product for driver's side, another for passenger side
• Aluminum panels won't rust and weigh around 10lb, angled brackets + large panel
• Stainless steel hardware, nylon insert self locking nuts; 3/16 hex head front and 5/16 back nuts
• Rubber pads separate panel from glass
• mounts in 2 parts for easier installation, angled top bracket first
• powder coated black, or raw aluminum for your own custom painting
Usage
• 1 or 2 RotoPax containers sit side by side, 2 gallons each, 1, 1.5...
• tread boards can also be mounted, but will stick out from the back if youurs are 45+ inches long
• all holes (slits and X shapes) are 1/4 inch wide, allow for attaching your own bolts for future accessories
• wide hole strips, vertical and horizontal, allow for strap attachments
• 4 hole square pattern on main panel is for Rotopax mounts (2 1/8 inch square holes fit the square Rotopax bolt mounts)
• customizing: drill your own holes if needed in the future (measure twice)
Driver main panel
• July 2024: latest version
• Raw aluminum (before sanding)
• Can be used on either side
Driver main panel
Passenger main panel
• July 2024: latest version
• Sanded aluminum (before powder coating)
• Extra holes for visibility on passenger side
• Can be used on either side
Passenger main panel
Marked holes on main panel
• Red: regular mounting positions for Rotopax container mounts
• -- By using the adjacent holes you can distance the containers, introducing a gap for a fire extinguisher to mount
• Blue: mounting holes for suction cups
• Green: Fire extinguisher mounting holes -- when mounted here, and the left Rotopax mount furthest away, the fire extinguisher can be removed without removing the Rotopax container
• -- To require Rotopax container removal first, use the 3 holes to the left instead
• Top 4 holes are for joining main panel to top (wing) panel
Marked holes on main panel
Gear to get
• Compare prices from Rotopax.com to GoWesty.com and Amazon.com
• Gen1 Rotopax containers are not supported, they only fit upside down. Use Gen2 Rotopax containers only.
• 4 gallon Rotopax is not a goot fit, it sticks too far off the back and is not tall enough, making for a poor use of the main panel space. Using two 2 gallon containers is more convenient.
Passenger side
• Wing and main panel for passenger side, powder coated
• Wing is side specific
• Main panel has more holes on passenges side but can be used on either side
roXterra